Skip to main content
Guide

Inside Hunter HydroTech’s Professional Spring Sprinkler Start-Up Process

See how Hunter HydroTech carefully pressurizes irrigation systems, tests every zone, adjusts sprinkler heads, reviews controllers, starts pump-fed systems, and documents needed repairs.

Updated November 17, 2026 Hunter HydroTech LLC Michigan Irrigation Knowledge Center

A professional sprinkler spring start-up should involve more than turning on the water. At Hunter HydroTech, our standard service includes carefully restoring water pressure, checking applicable backflow and valve components, running every zone, clearing around spray heads, adjusting coverage, reviewing controller programming, and documenting problems.

Our technicians also explain their findings and help homeowners understand what their irrigation system needs before the growing season.

1. Review the Property's Irrigation Service Notes

Before beginning, our technicians check the property's service records in Hunter Field Service Management (HFSM). These records may identify the irrigation controller, backflow preventer, interior or exterior drains, drain caps, and other important system details.

2. Prepare the System Before Turning On Water

On applicable city-water systems, we locate and secure the drain plugs or caps that were removed during winterization. We inspect the accessible backflow preventer and position the appropriate valves for controlled start-up.

Drain points must be properly closed and secured before introducing water.

3. Restore Water Pressure Carefully

Rather than abruptly opening the irrigation supply, we slowly introduce water to reduce sudden pressure changes and the risk of water hammer.

We inspect the supply valve and accessible interior drains for leakage. Then we gradually pressurize the backflow assembly and examine its relevant seals and components.

On pressure vacuum breakers, that includes checking the poppet and bonnet areas. We wipe away residual moisture and check for fresh water beading or leakage. After the assembly is pressurized and inspected, we gradually open the downstream supply.

4. Check Irrigation Valves and Listen for Leaks

While the piping and valve assemblies fill, our technicians listen for water hammer, unusual vibration, and continued water movement that could signal a problem.

Where accessible, we inspect valve boxes for visible seepage or signs of a leaking valve or connection.

5. Review the Sprinkler Controller

We check the controller's date and time, watering days, zone run times, and active programs. We also look for multiple start times or conflicting schedules that could cause unnecessary watering.

The goal is a practical watering schedule suited to the functioning system, with the homeowner informed about how it operates.

6. Run and Inspect Every Irrigation Zone

Our standard start-up process typically runs each zone for approximately two to three minutes while we check how the sprinkler heads and piping operate.

We look for heads that fail to rise or rotate, leaking seals and fittings, poor coverage, misdirected spray, pressure problems, and excessive runoff.

7. Clear Around Spray Heads and Adjust Coverage

Grass, soil, roots, and thatch can gradually cover sprinkler heads. During a standard start-up, we use a hand shovel or suitable tool to clear around spray heads where needed.

We also make routine sprinkler head adjustments to improve watering coverage and help limit unnecessary runoff.

Replacement parts, significant excavation, and additional repair work are quoted separately when needed.

8. How Pump-Fed Spring Start-Ups Are Different

Pump-fed irrigation systems require additional preparation. Depending on the equipment, our technicians reconnect the appropriate pump relay wiring, reinstall pump drain plugs, reconnect the intake, and inspect its placement so it is not resting directly in bottom debris.

We prime the pump by introducing water through the appropriate fill opening, filling the pump and connected intake piping as required by the system.

After priming, we operate a zone and use the appropriate connection to release trapped air while checking for normal pump operation and water delivery.

Exact steps vary by pump and installation. Electrical connections and pump priming must be performed using the applicable equipment procedures and safety precautions.

9. Document Problems and Provide Repair Options

If we discover damage or needed repairs, our technicians take photographs, complete an inspection report in HFSM, and prepare repair estimates with supporting documentation.

Good: Necessary Operational Repairs

This option focuses on issues that need to be addressed for the system to operate properly, such as major leaks or failed valves.

Better: Necessary Repairs and Recommended Fixes

This includes essential repairs and other recommended work identified during the inspection.

Best: Comprehensive Improvements

This option can include additional repairs, leaky-head replacement, system improvements, and optional upgrades such as a smart irrigation controller.

The customer can review the options before approving separately priced repair work.

10. Handle Repairs and Problem Zones

Approved repairs may be completed during the visit when the schedule and job conditions allow. Larger repairs may require a return appointment.

When a zone has a problem that cannot be repaired immediately, we flag and document it and may disable the zone at the controller. If a leak remains pressurized or cannot be controlled by the controller, the water supply must be appropriately isolated.

11. Perform a Final Review With the Homeowner

After the start-up and any approved work completed during the visit, we review system operation and explain the watering schedule and controller functions to the homeowner.

Once the controller is correctly programmed, we generally recommend leaving the schedule in place rather than making frequent unnecessary adjustments.

What Is Included in the Standard Spring Start-Up?

The standard Hunter HydroTech spring start-up includes applicable system preparation, controlled pressurization, operational inspection, zone testing, routine sprinkler head clearing and adjustments, controller review, and documentation of identified problems.

More extensive repairs, parts, additional visits, and optional upgrades are quoted separately.

Residential spring start-ups start at $70, with pricing depending on the applicable service area, system configuration, and additional zones.

Further Reading: Real Spring Start-Up and Pump System Experience

Want to learn more about the problems a spring start-up can reveal? These Hunter HydroTech resources cover real field work and the technical differences between irrigation systems.

Schedule a Spring Sprinkler Start-Up in Southeast Michigan

Hunter HydroTech LLC serves homeowners throughout Macomb, Oakland, and surrounding Southeast Michigan communities with irrigation spring start-ups, troubleshooting, repairs, pump service, backflow work, and controller upgrades.

Learn more about our spring start-up service or book your spring sprinkler start-up.

Hunter HydroTech LLC — Reliable, Local, and Family-Owned. Sprinkler systems done right.

Professional Irrigation Service

Need help diagnosing your sprinkler system?

Hunter HydroTech provides residential and commercial irrigation repair, pump-system service, valve diagnosis, controller troubleshooting, backflow service, revamps and seasonal maintenance throughout Southeast Michigan.

Related Spring Startups Guides