Patio construction frequently changes the path of sprinkler lines and the shape of the lawn that remains after the hardscape is finished. Hunter HydroTech completed a patio-related irrigation revamp in St. Clair Shores, Michigan that required more than reconnecting a single cut pipe.
The project included reconnecting affected irrigation lines, adding new spray heads and rotors, and replacing older Maxi-Paw impact rotors with Hunter PGP Ultras.
Why patio projects disrupt sprinkler coverage
Existing sprinkler systems are laid out around the yard as it existed when the irrigation was installed. A new patio can cover old sprinkler locations, remove sections of lawn, interrupt lateral lines, or create new narrow areas that need different head placement.
Reconnecting affected irrigation lines
The first part of reconstruction is re-establishing dependable water paths to the zones that still serve useful areas of the property. Cut or disconnected irrigation piping must be exposed, identified, and reconnected in a way that fits the new patio footprint.
Adding sprays and rotors around the new layout
Hunter HydroTech added spray heads where shorter-radius coverage was needed and rotors where larger turf areas required longer-distance coverage. Placement was based on the finished landscape rather than the old pre-patio layout.
Upgrading older Maxi-Paws to Hunter PGP Ultras
The system also had older Maxi-Paw impact rotors. Hunter HydroTech upgraded affected heads to Hunter PGP Ultras. When a system is already being reconstructed, modernizing older impact rotors can simplify future maintenance and create a more consistent rotor setup.
Testing after patio-related irrigation work
Final checks include leaks at reconnected lines, correct spray and rotor operation, pressure across the complete zone, coverage around the patio footprint, proper head height and alignment, and complete valve shutoff.
St. Clair Shores sprinkler revamps
Hunter HydroTech provides sprinkler repair and irrigation reconstruction throughout Southeast Michigan, including systems affected by patios, pools, sidewalks, driveways, landscaping, and other property improvements.
Visit our St. Clair Shores irrigation service page or St. Clair Shores sprinkler repair page.
Frequently Asked Questions
Why did the St. Clair Shores sprinkler system need to be revamped?
What sprinkler heads were added?
What happened to the old Maxi-Paws?
Should old sprinkler lines always be put back in the same location after patio work?
Professional Irrigation Service
Need help diagnosing your sprinkler system?
Hunter HydroTech provides residential and commercial irrigation repair, pump-system service, valve diagnosis, controller troubleshooting, backflow service, revamps and seasonal maintenance throughout Southeast Michigan.
Related Case Studies Guides
Drip Irrigation Zone Installation for New Flower Beds in New Baltimore, MI
After a New Baltimore homeowner completed a new pool and landscape project, portions of the irrigation revamp were still unfinishe...
Read guide →Fraser Irrigation Backflow Upgrade: Replacing Older AVB Protection With a 1-Inch Wilkins 710 PVB
Hunter HydroTech has encountered older Fraser irrigation systems using atmospheric vacuum breaker arrangements. This Fraser field...
Read guide →Sterling Heights Sprinkler Rebuild After Fiber-Optic Trenching Damage
A fiber-installation crew trenched through the side yard of a Sterling Heights property, damaging sprinkler wiring and piping and...
Read guide →