A spray riser should retract after the zone shuts off. Age, dirt, sand, and other debris can gum up the spring and internal body, leaving the riser exposed.
Why the problem matters
A raised spray head is more likely to be struck by a mower, edger, foot traffic, or other equipment.
Basic service approach
Inspect the riser and flush the head when appropriate. If the riser remains sticky, the seal leaks, or the body is worn, replacing the spray body is often more dependable.
Frequently Asked Questions
Why will my spray head not retract?
Can a stuck spray head be cleaned?
Why is a raised spray head a problem?
Professional Irrigation Service
Need help diagnosing your sprinkler system?
Hunter HydroTech provides residential and commercial irrigation repair, pump-system service, valve diagnosis, controller troubleshooting, backflow service, revamps and seasonal maintenance throughout Southeast Michigan.
Related Sprinkler Repair Guides
Sprinkler Rotor Spacing and Head-to-Head Coverage
Learn how head-to-head rotor coverage helps water lawns evenly and why spacing, pressure, nozzle demand, and wind must be evaluate...
Read guide →Hunter PGP Ultra vs. Hunter I-20
Compare the Hunter PGP Ultra and Hunter I-20 and learn when check-valve drainage control, longer runs, larger properties, or high-...
Read guide →Why Water Leaks Around a Sprinkler Rotor
Learn how to distinguish a rotor seal leak, broken swing assembly, underground fitting leak, low-head drainage, and seeping irriga...
Read guide →